diff -crN buildroot-2013.08.1-ckb-20150123-1/board/ckb/ckb-3352/configs/linux-3.2.1.config buildroot-2013.08.1-ckb-20150123-1-new/board/ckb/ckb-3352/configs/linux-3.2.1.config
*** buildroot-2013.08.1-ckb-20150123-1/board/ckb/ckb-3352/configs/linux-3.2.1.config	2014-12-15 22:56:43.000000000 +0900
--- buildroot-2013.08.1-ckb-20150123-1-new/board/ckb/ckb-3352/configs/linux-3.2.1.config	2015-10-13 18:21:39.932297600 +0900
***************
*** 282,296 ****
  # CONFIG_ARCH_ZYNQ is not set
  CONFIG_SOC_OMAPAM33XX=y
  CONFIG_MACH_CKB_3352=y
- CONFIG_CKB_SUSPEND_SUPPORT=y
  CONFIG_CKB_TSC2007_TOUCH_PANEL=y
  CONFIG_CKB_RTC=y
  CONFIG_CKB_LCD_SUPPORT=y
  CONFIG_CKB_LCD_01=y
  # CONFIG_CKB_LCD_02 is not set
! CONFIG_CKB_DVI_SUPPORT=y
! CONFIG_DISPLAY_DVI_RESOLUTIONS=y
! CONFIG_DISPLAY_UNSUPPORTED_DVI_RESOLUTIONS=y
  CONFIG_LCD_CLOCK_CLOSEST_MATCH=y
  CONFIG_CKB_EASY_SWITCH_MODE=y
  CONFIG_OMAP_PACKAGE_CBB=y
--- 282,293 ----
  # CONFIG_ARCH_ZYNQ is not set
  CONFIG_SOC_OMAPAM33XX=y
  CONFIG_MACH_CKB_3352=y
  CONFIG_CKB_TSC2007_TOUCH_PANEL=y
  CONFIG_CKB_RTC=y
  CONFIG_CKB_LCD_SUPPORT=y
  CONFIG_CKB_LCD_01=y
  # CONFIG_CKB_LCD_02 is not set
! # CONFIG_CKB_DVI_SUPPORT is not set
  CONFIG_LCD_CLOCK_CLOSEST_MATCH=y
  CONFIG_CKB_EASY_SWITCH_MODE=y
  CONFIG_OMAP_PACKAGE_CBB=y
***************
*** 313,320 ****
  #
  # Disable LCD support to enable devices on Pins 6,31,36,38 (spidev1, eHRPWM0)
  #
- # CONFIG_CKB_EXTCN_SPIDEV_SPI1 is not set
- # CONFIG_CKB_EHRPWM0 is not set
  CONFIG_CKB_EXTCN_ADC=y
  
  #
--- 310,315 ----
***************
*** 324,377 ****
  #
  # Disable LCD support to enable Pin2 multiplex options
  #
- # CONFIG_CKB_EX_CN_PIN2_LCD_DATA12 is not set
- # CONFIG_CKB_EX_CN_PIN2_A16 is not set
- # CONFIG_CKB_EX_CN_PIN2_EQEP1A_IN is not set
- # CONFIG_CKB_EX_CN_PIN2_MCASP0_ACLKR is not set
- # CONFIG_CKB_EX_CN_PIN2_MCAP0_AXR2 is not set
- # CONFIG_CKB_EX_CN_PIN2_PR1_MII0_RXLINK is not set
- # CONFIG_CKB_EX_CN_PIN2_UART4_CTS is not set
- # CONFIG_CKB_EX_CN_PIN2_OGPIO is not set
- # CONFIG_CKB_EX_CN_PIN2_IGPIO is not set
  
  #
  # Disable LCD support to enable Pin4 multiplex options
  #
- # CONFIG_CKB_EX_CN_PIN4_LCD_DATA13 is not set
- # CONFIG_CKB_EX_CN_PIN4_A17 is not set
- # CONFIG_CKB_EX_CN_PIN4_EQEP1B_IN is not set
- # CONFIG_CKB_EX_CN_PIN4_MCASP0_FSR is not set
- # CONFIG_CKB_EX_CN_PIN4_MCAP0_AXR3 is not set
- # CONFIG_CKB_EX_CN_PIN2_PR1_MII0_RXER is not set
- # CONFIG_CKB_EX_CN_PIN4_UART4_RTS is not set
- # CONFIG_CKB_EX_CN_PIN4_OGPIO is not set
- # CONFIG_CKB_EX_CN_PIN4_IGPIO is not set
  
  #
  # Disable LCD support and spidev1 to enable Pin6 multiplex options
  #
- # CONFIG_CKB_EX_CN_PIN6_MCASP0_AHCLKR is not set
- # CONFIG_CKB_EX_CN_PIN6_EHRPWM0_SYNCI is not set
- # CONFIG_CKB_EX_CN_PIN6_MCASP0_AXR2 is not set
- # CONFIG_CKB_EX_CN_PIN6_SPI1_CS0 is not set
- # CONFIG_CKB_EX_CN_PIN6_ECAP2_IN_PWM2_OUT is not set
- # CONFIG_CKB_EX_CN_PIN6_PR1_PRU0_PRU_R30_3 is not set
- # CONFIG_CKB_EX_CN_PIN6_PR1_PRU0_PRU_R31_3 is not set
- # CONFIG_CKB_EX_CN_PIN6_OGPIO is not set
- # CONFIG_CKB_EX_CN_PIN6_IGPIO is not set
  
  #
  # Disable LCD support to enable Pin10 multiplex options
  #
- # CONFIG_CKB_EX_CN_PIN10_MCASP0_FSR is not set
- # CONFIG_CKB_EX_CN_PIN10_EQEP0B_IN is not set
- # CONFIG_CKB_EX_CN_PIN10_MCASP0_AXR3 is not set
- # CONFIG_CKB_EX_CN_PIN10_MCASP1_FSX is not set
- # CONFIG_CKB_EX_CN_PIN10_EMU2 is not set
- # CONFIG_CKB_EX_CN_PIN10_PR1_PRU0_PRU_R30_5 is not set
- # CONFIG_CKB_EX_CN_PIN10_PR1_PRU0_PRU_R31_5 is not set
- # CONFIG_CKB_EX_CN_PIN10_OGPIO is not set
- # CONFIG_CKB_EX_CN_PIN10_IGPIO is not set
  
  #
  # Disable Support GPMC CS1 mem to enable Pin21 multiplex options
--- 319,336 ----
***************
*** 409,422 ****
  # CONFIG_CKB_EX_CN_PIN30_XDMA_EVENT_INTR2 is not set
  CONFIG_CKB_EX_CN_PIN30_OGPIO=y
  # CONFIG_CKB_EX_CN_PIN30_IGPIO is not set
- # CONFIG_CKB_EX_CN_PIN31_MCASP0_AXR0 is not set
- # CONFIG_CKB_EX_CN_PIN31_EHRPWM0_TRIPZONE_INPUT is not set
- # CONFIG_CKB_EX_CN_PIN31_SPI1_D1 is not set
- # CONFIG_CKB_EX_CN_PIN31_MMC2_SDCD is not set
- # CONFIG_CKB_EX_CN_PIN31_PR1_PRU0_PRU_R30_2 is not set
- # CONFIG_CKB_EX_CN_PIN31_PR1_PRU0_PRU_R31_2 is not set
- # CONFIG_CKB_EX_CN_PIN31_OGPIO is not set
- # CONFIG_CKB_EX_CN_PIN31_IGPIO is not set
  # CONFIG_CKB_EX_CN_PIN33_MCASP0_AXR1 is not set
  # CONFIG_CKB_EX_CN_PIN33_EQEP0_INDEX is not set
  # CONFIG_CKB_EX_CN_PIN33_MCASP1_AXR0 is not set
--- 368,373 ----
***************
*** 486,492 ****
  CONFIG_OMAP_MUX=y
  CONFIG_OMAP_MUX_DEBUG=y
  # CONFIG_OMAP_32K_TIMER is not set
! CONFIG_TI_PM_DISABLE_VT_SWITCH=y
  # CONFIG_GPIO_PCA953X is not set
  
  #
--- 437,443 ----
  CONFIG_OMAP_MUX=y
  CONFIG_OMAP_MUX_DEBUG=y
  # CONFIG_OMAP_32K_TIMER is not set
! # CONFIG_CKB_SUSPEND_SUPPORT is not set
  # CONFIG_GPIO_PCA953X is not set
  
  #
***************
*** 827,833 ****
  CONFIG_PREVENT_FIRMWARE_BUILD=y
  CONFIG_FW_LOADER=y
  CONFIG_FIRMWARE_IN_KERNEL=y
! CONFIG_EXTRA_FIRMWARE="am335x-pm-firmware.bin cmj100/wl1271-nvs.bin cmj100/wl127x-fw-3.bin"
  CONFIG_EXTRA_FIRMWARE_DIR="firmware"
  CONFIG_DEBUG_DRIVER=y
  # CONFIG_DEBUG_DEVRES is not set
--- 778,784 ----
  CONFIG_PREVENT_FIRMWARE_BUILD=y
  CONFIG_FW_LOADER=y
  CONFIG_FIRMWARE_IN_KERNEL=y
! CONFIG_EXTRA_FIRMWARE="cmj100/wl1271-nvs.bin cmj100/wl127x-fw-3.bin"
  CONFIG_EXTRA_FIRMWARE_DIR="firmware"
  CONFIG_DEBUG_DRIVER=y
  # CONFIG_DEBUG_DEVRES is not set
***************
*** 1622,1628 ****
  # CONFIG_VIDEO_OUTPUT_CONTROL is not set
  CONFIG_FB=y
  CONFIG_FIRMWARE_EDID=y
! CONFIG_FB_DDC=y
  # CONFIG_FB_BOOT_VESA_SUPPORT is not set
  CONFIG_FB_CFB_FILLRECT=y
  CONFIG_FB_CFB_COPYAREA=y
--- 1573,1579 ----
  # CONFIG_VIDEO_OUTPUT_CONTROL is not set
  CONFIG_FB=y
  CONFIG_FIRMWARE_EDID=y
! # CONFIG_FB_DDC is not set
  # CONFIG_FB_BOOT_VESA_SUPPORT is not set
  CONFIG_FB_CFB_FILLRECT=y
  CONFIG_FB_CFB_COPYAREA=y
diff -crN buildroot-2013.08.1-ckb-20150123-1/board/ckb/ckb-3352/patches/linux-3.2.1-001-20151005-kconfig.patch buildroot-2013.08.1-ckb-20150123-1-new/board/ckb/ckb-3352/patches/linux-3.2.1-001-20151005-kconfig.patch
*** buildroot-2013.08.1-ckb-20150123-1/board/ckb/ckb-3352/patches/linux-3.2.1-001-20151005-kconfig.patch	1970-01-01 09:00:00.000000000 +0900
--- buildroot-2013.08.1-ckb-20150123-1-new/board/ckb/ckb-3352/patches/linux-3.2.1-001-20151005-kconfig.patch	2015-10-13 18:20:46.572660772 +0900
***************
*** 0 ****
--- 1,16 ----
+ diff -crN linux-3.2.1/arch/arm/mach-ckb_3352/Kconfig linux-3.2.1-new/arch/arm/mach-ckb_3352/Kconfig
+ *** linux-3.2.1/arch/arm/mach-ckb_3352/Kconfig	2015-10-05 18:30:06.955446362 +0900
+ --- linux-3.2.1-new/arch/arm/mach-ckb_3352/Kconfig	2015-10-05 18:32:02.521299000 +0900
+ ***************
+ *** 31,40 ****
+   	select I2C_OMAP
+   	select HAVE_PWM
+   
+ - config CKB_SUSPEND_SUPPORT
+ - 	bool "Suspend support"
+ - 
+ - 
+   config CKB_TSC2007_TOUCH_PANEL
+   	bool
+   
+ --- 31,36 ----
