COMPUTEX Introduction of F-Sight

F-Sight is provided in: 2VP-PPC model supporting hard-core processors PowerPC 405 and PowerPC440 and MicroBlaze model supporting soft-core processor MicroBlaze.
Both models have functional capability to serve for CPU emulation and FPGA hardware debugging, not to mention configuration.
In addition, they support cooperative debugging by relating FPGA hardware debugging to corresponding software debugging.
F-Sight is the most suitable emulator for software debugging and hardware debugging of Xilinx-made FPGA delivering high level debugging functionality in simple environment.

Concurrent debugging of FPGA and CPU
F-Sight realizes total debugging environment for both software and hardware in one unit, allowing activities from CPU emulation to practical debugging by monitoring FPGA internal user logic in wave form, not to mention FPGA configuration.

Cooperative debugging
Allows cooperative debugging of hardware and CPU software.
Allows to correlate the software and hardware while checking the corresponding programme execution history.

* Supported in MicroBlaze model by (optional) trace debug library

Also provides perfect debugging environment for embedded CPU !
-CPU execution control
    go/break/step/come
-Variable reference change
-Memory/Register reference change
-Break functions
    CPU break function
    Software break function
-CPU trace (execution history logging) function *1
-I/O reference change

*1 Supported in MicroBlaze model by (optional) trace debug library

Realizes practical debugging environment for FPGA !
-Readback function
    Quick inspection
    Watch function
    Block RAM reference
-Probing function
    Adds/Registers and automatically wires signal to monitor in HDL source Window.
-Analyzer function
     : Monitors wave pattern in 16chs (MAX. 48chs:With optional accessory)
-High-speed configuration

Readback function
Shows the state of the signal in Inspect view when the mouse cursor has been moved to point the name of the signal output with location information on source file.

* Not supported by Spartan-3 Generation FPGA

Probing function
Allows to add/register signal to monitor in wave form on source file.
The effect to the user circuit will be almost none since only the wiring will be added without resynthesis.
Allows easy monitoring of the wave pattern.

Debugging FPGA logic

Simple connection
Allows instant connection with hot plug USB connector for the host PC and dedicated debug connector for the target.

Analyzer Extension Probe (Optional)
With the use of optional analyzer expansion probe, another 32 channels can be added to analyzer channels.

Target adapter conversion set (Optional)
Conversion adapter is available for the target system not provided with MICTOR connector or for connection with the target system already completed.

F-Sight Target Interface

In the F-Sight target interface, all the JTAG signals, trace signals and the analyzer signals are put together to the 38-pin Mictor connector.
2VP-PPC model When the JTAG signals of FPGA and the JTAG signals of PowerPC are not connected in daisy chain When the JTAG signals of FPGA and the JTAG signals of PowerPC are connected in daisy chain	MicroBlaze model

Operating environment

Supported host:	IBM PC/AT compatibles (DOS/V machines)
Host I/F:	USB 2.0(1.1 also supported)
Supported OS:	Windows 2000/XP/7

Hardware optional accessory

Analyzer expansion probe	Expands the number of channels in analyzer by 32.
Target conversion adapter set	Conversion adapter is available for F-Sight connection with the target system not provided with MICTOR connector or with the target system that has already been completed.
ML403 special-purpose adapter	Conversion adapter for connecting F-Sight to ML403 / ML405 / ML501 / ML507 Evaluation Platform, Xilinx-made development board.
Spartan-3E conversion adapter	Conversion adapter for connecting F-Sight to Spartan-3E / Spartan-3A Starter Kit, Xilinx-made development board.
SUZAKU-V Starter Kit-specific conversion adapter	Conversion adapter specifically for connecting F-Sight to Atmark Techno-made SUZAKU Starter Kit.

Model	Supported devices *1	Product summary	Technical information
2VP-PPC	Virtex-II Pro (XC2VP2 and Virtex-II Pro X are not supported), Virtex-4 FX,Virtex-5FXT
MicroBlaze	Virtex-II,Virtex-II Pro,Virtex-4,Virtex-5LX,Virtex-5LXT, Spartan-3,Spartan-3E,Spartan-3A,Spartan-3AN,Spartan-3A DSP

*1: For details on supported devices, please contact us.

URL:http://www.hitechglobal.com/

Overseas distributor
HiTech Global Distribution, LLC


	To view the data in PDF format, you will need Adobe Acrobat Reader. Adobe, Acrobat, and Acrobat Reader are registered trademarks of Adobe Systems Incorporated.